ToolsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide9-33You can select Soften +2, Soften +1, Normal, Sharpen +1, or Sharpen +2.Normal sets the sharpness at the standard level; Soften +2 sets it lower; Sharpen +2 sets it higher.Normal is set at the time of factory shipment.For more information, refer to Copy Settings : Sharpness on page 9-30.Edge EraseSets the default value displayed for Edge Erase. Setting a value for this menu item erases the blackshadows created around the edges of the paper when scanning with the document cover open.You can set values between 0 and 10 mm (in 1 mm increments).2 mm is set at the time of factory shipment.For more information, refer to Default Settings > ID Card Copy > Edge Erase on page 9-10.For more information, refer to Default Settings > Fax > Edge Erase on page 9-13Maximum Attachment SizeSets the maximum file size for an e-mail attachment.You can set values between 2 and 20 MB (in 1 MB increments).20 MB is set at the time of factory shipment.Recipient ConfirmationSets whether to confirm the recipient information before sending data.You can select On or Off.Off is set at the time of factory shipment.
