AppendixXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide14-13• Colors may appear muted on the underside of high-density images in printing in low-temperature,low-humidity environments.• Small white spots may appear within images on the back side of the paper in printing in low-humidity environments.Document FeederThe machine does not detect a document placed in the document feeder during Sleep mode.Notes and Restrictions on the Use of the Copy FeatureCopy FeatureThe machine does not offer the Improves Fit function.ID Card CopyThe front and back side of the placed ID card are printed on each half sheet of a paper in center exceptthe following cases:• When the size of the ID card is larger than the standard printable size of the ID Card Copy feature,the image is not printed in center.• When the size of ID card is larger than the standard printable size of the ID Card Copy feature, apart of the image may be cut off.• The edges of the ID card may be cut off due to the edge erase.About MemoryIf the machine’s memory capacity becomes insufficient when copying using the collate feature, itoutputs only the document data which is being scanned.Notes and Restrictions on the Use of the Print FeatureOutput of Long Feed DocumentsThe output of long feed documents is not supported.Print Jobs while the Control Panel is being OperatedThe processing print job or output speed may be reduced in the following cases:• When the control panel is operated during print job execution• When the print job's status is displayed in the Job Status screen• Even if the print driver is configured to skip blank pages, the blank pages with white characters,newline characters and space characters will be printed.When the print results differ from the settingsAs in the following cases, insufficient memory for the print page buffer may cause print result in notprinting as specified.
