Xerox WorkCentre 5845 Getting Started Manual

Also see for WorkCentre 5845: Installation and operation User information Secure installation and operation Quick reference guide Specifications

Xerox WorkCentre 5845 Getting Started Manual Manual pdf 6 page image

Safety and Regulations4 WorkCentre ® 5845/5855/5865/5875/5890Getting Started GuideOperational Safety InformationYour Xerox device and supplies have been designed and tested to meet strict safety requirements. Theseinclude safety agency examination, approval, and compliance with established environmentalstandards. To ensure the continued safe operation of your Xerox device, follow the safety guidelines onthis website at all times.Electrical SupplyThis document provides important electrical supply safety information that you should read beforeinstalling or using the device.Read the information in the following sections:• Power Outlet Electrical Safety• Power Cord Electrical Safety• Laser Safety Information• Device Safety• Emergency Power Off• Disconnect DevicePower Outlet Electrical SafetyThis device must be operated from the type of electrical supply indicated on the data plate label locatedon the rear cover of the device. If you are not sure that your electrical supply meets the requirements,please consult your local power company or a licensed electrician for advice.The electrical supply outlet should be installed near the device and should be easily accessible.WARNING: This device must be connected to a protective earth circuit. This device is suppliedwith a plug that has a protective earth pin. This plug will only fit into an earthed electrical outlet.This is a safety feature. If you are unable to insert the plug into the outlet, contact a licensedelectrician to replace the outlet. Always connect the device to a correctly grounded power outlet.If in doubt, have the outlet checked by a qualified electrician. Improper connection of the device-grounding conductor can result in electrical shock.Power Cord Electrical Safety• Use only the power cord supplied with this device.• Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If youdo not know whether or not an outlet is grounded, consult a qualified electrician.• Do not place this device where people might step on or trip on the power cord.• Do not place objects on the power cord.• To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger telecommunicationline cord.