Xerox WorkCentre 5845 Getting Started Manual

Also see for WorkCentre 5845: Installation and operation User information Secure installation and operation Quick reference guide Specifications

Xerox WorkCentre 5845 Getting Started Manual Manual pdf 74 page image

Getting Started72 WorkCentre ® 5845/5855/5865/5875/5890Getting Started GuideWhen you use the document feeder, your documents will pass over the stationary scanner using theConstant Velocity Transport glass. Any dirt or marks on this piece of glass will cause lines or streaks onyour copies, faxes or scanned images. Also, any marks or dirt on the Constant Velocity Transport roll mayshow through the document and appear on your scanned images.1. Use a lint-free cloth, lightly dampened with Xerox Anti-Static or general cleaning fluid (or anothersuitable non-abrasive glass cleaner) to clean the document glass and the Constant VelocityTransport glass (the narrow strip of glass to the left of the main document glass).2. Wipe away any residue with a clean cloth or paper towel.3. Use a lint-free cloth, lightly dampened with water, Xerox cleaning fluid or Xerox film remover toclean the under side of the document cover or document feeder and the complete circumferenceof the Constant Velocity Transport roll.WARNING: When cleaning the device do NOT use organic or strong chemical solvents or aerosolcleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials only asdirected in this documentation. Keep all cleaning materials out of the reach of children.WARNING: Do not use pressurized air-spray cleaning aids on or in this equipment. Some pressur-ized air-spray containers contain explosive mixtures and are not suitable for use in electrical appli-cations. Use of such cleaners can result in a risk of explosion and fire.Cleaning the Control Panel, Touch Screen, Document Feeder and OutputTraysRegular cleaning keeps the touch screen, control panel and other device areas free from dust and dirt.1. Use a soft, lint-free cloth, lightly dampened with water.2. Wipe clean the entire area of the control panel, including the touch screen.3. Wipe clean the document feeder, output trays, paper trays and other outside areas of your device.4. Remove any residue with a clean cloth or paper towel.Clearing Paper JamsWhen a paper jam occurs, a fault screen is displayed which provides recovery instructions. Follow theseinstructions to clear the fault.Any printed sheets removed will automatically be reprinted once the paper jam is cleared.1. The fault screen will indicate the location of the jam. Use the green handles and knobs indicatedin the instructions displayed on the touch screen to remove the jammed paper.2. Ensure that all jam clearance handles and levers are returned to their correct positions. The redflashes behind the jam clearance handles and levers should not be visible.