Xerox WorkCentre 5945 Quick Start Manual

Also see for WorkCentre 5945: Secure installation and operation How to make a copy User's guide and warranty Service manual

Xerox WorkCentre 5945 Quick Start Manual Manual pdf 63 page image

Getting Started WorkCentre ® XXXX60 User GuideIf a job is held in the list, it may require additional resources or a secure code to print. The reasonfor the held status is displayed on the Job Progress screen. Once the requirement has been met orthe correct secure code entered, the job is released for printing.To enhance productivity your System Administrator can change the default settings for many of thefeatures to the settings most commonly used in your work group. For example, your SystemAdministrator could increase the default darkness of copies if you regularly copy lightly markeddocuments such as pencil drawings.Refer to the System Administrator Guide for further information.Maintenance and ConsumablesIdentifying the Replaceable UnitsThere are several consumables on the device that need replenishing or replacing, such as paper,staples, and customer replaceable units.1. Toner Cartridge2. Print CartridgeThe device will display a message on the touch screen when any of the units need to be re-ordered.This message is a warning that the unit is nearing the end of its life. Only replace the unit when amessage actually instructs you to do so.! WARNINGWhen replacing consumables do NOT remove the covers or guards that are fastened with screws.You cannot maintain or service any of the parts that are behind these covers and guards. Do NOTattempt any maintenance procedure that is NOT specifically described in the documentation sup-plied with your device.