Copying164 Xerox ® WorkCentre® 6605 Color Multifunction PrinterUser GuideChanging the Saturation1. Touch Saturation, then select an option.2. Touch OK.Changing Auto Background Suppression1. Touch Auto Background Suppression, then select an option.2. Touch OK.Changing Auto Background Suppression Level1. Touch Auto Background Suppression Level, then select an option.2. Touch OK.Changing the Default Color BalanceThe Color Balance control allows you to adjust the print color of your printer. Each of the four primarycolors of red, green, blue, and gray balance, have five density settings. The density settings adjust theoutput based on the level of color saturation. Adjusting the setting negatively lowers the density andlightens the output. Adjusting the setting positively increases the density and darkens the output.Examples of low density areas include faces and sky.To change the default color balance:1. Touch Color Balance.2. Touch the color you want to adjust.3. To adjust the default density setting from -3 through +3, touch - or +.4. Touch OK.Changing 2-Sided Copying1. Touch 2-Sided Copying.2. Touch one of the following:− 1 - 1 Sided− 1 - 2 Sided− 2 - 1 Sided− 2 - 2 Sided3. To rotate the image on side 2 by 180 degrees, touch Rotate Side 2.4. Touch OK.
