Installation and Setup72 Xerox ® WorkCentre® 6605 Color Multifunction PrinterUser GuideSetting Fax Defaults from the Control PanelNote: If your printer is connected to your computer through a wired or wireless network connection,use CentreWare Internet Services to configure the fax settings.1. At the printer control panel, press the Machine Status button.2. Touch Tools, then touch Service Defaults.3. Touch Fax Defaults.4. Touch Resolution, select the default resolution for fax transmissions, then touch OK.5. Touch 2-Sided Scanning, select 1-Sided or 2-Sided, then touch OK.6. Touch Lighten/Darken, use the scale to make the fax lighter or darker, then touch OK.7. To select a delayed transmission time, touch Delayed Send.a. Touch the hour field, then use the keypad to enter the hour.b. Touch the minute field, then use the keypad to enter the minutes.c. Touch AM or PM.d. To save the setting, touch OK.8. To return to the Services Home menu, press the Services Home button.Configuring Fax Settings at the Control Panel (Bridgetown)Note: If your printer is connected to your computer through a wired or wireless network connection,use CentreWare Internet Services to configure the fax settings.There are four areas to configure in Fax Settings:• Fax Line Settings• Incoming Defaults• Transmission Defaults• Fax ReportsFor proper fax operation, before you use the fax, configure all of the settings. You can change thesettings using the control panel or CentreWare Internet Services.
