Xerox WorkCentre 7220 Installation Manual

Also see for WorkCentre 7220: Manual Installation and operation User information Secure installation and operation Specifications

Xerox WorkCentre 7220 Installation Manual Manual pdf 20 page image

Installation WorkCentre® 7200 SeriesCustomer Expectation and Installation Guide 17Connectivity for Remote ServicesFor Client Review of Expectations for Remote Services:1 To the extent necessary to fulfill Services, Customer grants Xerox, without charge, Remote Data Access. Remote Data Access shall be enabled byCustomer prior to the commencement of Services via a method prescribed by Xerox and Customer shall cooperate and assist Xerox in providingRemote Data Access. Unless Xerox deems Devices incapable of Remote Data Access, Customer is responsible to ensure that Remote Data Accessis maintained at all times Services are being performed, and Xerox will not be responsible for failures to meet service levels where Remote DataAccess is not fully maintained by Customer.2 Upon Xerox’s request, Customer shall also provide key contact information, such as IT contact name and phone number for support of theirDevices on the their network.3 Most Xerox equipment is supported and serviced using data that is automatically collected and transferred to Xerox via electronic transmissionfrom equipment through the Customer’s network (“Remote Data”). This Remote Data is considered confidential information under the serviceagreement terms.4 Remote Data transmitted from Customer may include device information such as registration, meter read, supply level, configuration andsettings, software version, and problem/fault code data and may be used by Xerox for billing, report generation, supplies replenishment, supportservices, on-going and future site optimization opportunities and product improvement purposes.5 Remote Data Access may also enable Xerox to make available to the customer maintenance releases or upgrades for software or firmware and toremotely diagnose and modify devices to repair and correct faults.6 Remote Data will be transmitted to a secure off-site location in a secure manner specified by Xerox in accordance with Xerox published policies oninformation security [at http://www.xerox.com/information-security/enus.html] for your region.Install Support7 For Install Support that includes Xerox System Analysts:Customer shall contact and/or be contacted by their Xerox Systems Analyst.For Install Support that does not include Xerox System Analysts:Customer shall first utilize their Product System Administrator Guides available at Xerox.com, under the Support and Drivers link and by selectingdocumentation for their desired product. If unsuccessful, the Customer should go to Xerox.com and select “Technical Product Support” within the“Contacts” link to determine the appropriate contact for further support.Connectivity Information8 See Table BelowSetup Remote Services on Xerox device:Use the following to begin the establishment of Remote Services for your new Xerox device. This is not to replacethe product System Administrator Guide or Installation Guide but to identify certain install tasks that can becompleted before and after the delivery of your device.In order to take advantage of Xerox offerings, Device Direct and/or Xerox Device Agent (like XDA lite) software mustbe installed and devices connected and communicating to Xerox. These offerings may include Automatic MeterReads, Automatic Supplies Replenishment and Remote Diagnostics Support for your device(s).The following needs to be completed where applicable:Who?CustomerProfessional Services/PartnerCustomer Service EngineerPRE-DELIVERY: Device Networking Tasks:1. Non-Production Devices: After signing agreement with Xerox, an email will be sent to you with a web link to download theappropriate software to install on a PC/server that is operational 24/7.X2. Print Driver Software: Go to the “Support and Drivers” link on Xerox.com. If applicable, print drivers will be available todownload and install on your client devices.X3. Installation by Professional Services: To ensure Device Remote Connectivity can be established, network data will need to becollected by a Xerox Systems Analyst. A configuration form will be provided and require completion for each devicedocumenting connectivity and network information. Each individual device will require a configuration form, unless alldevices are to be configured in the same manner. In those cases, one configuration form along with a list of applicable serialnumbers on a separate sheet is acceptable.X4. IT Policy Compliance: You (customer) are responsible for obtaining approval for any internal IT policy compliance requiredfor the Xerox device/software to communicate via your intranet / internet to Xerox.XPOST-DELIVERY/INSTALL: Device Networking Tasks:5. Ethernet Cable: You (customer) need to provide an Ethernet cable for the device to the network drop. Cable Connection canbe completed by customer or installer depending on requirements.X X X6. Sustaining Connectivity: Remote Connectivity must be maintained to take advantage of Xerox offerings. Offerings includeRemote diagnostics, supplies replenishment, and meter reads from appropriate products.X