4-2 WorkCentre Pro 421 User GuidePrinting ProcedureBefore the printing function can be used on the WorkCentrePro 421 the machine must be configured and setup on yournetwork or attached to your workstation via the parallel port.NOTE: If you require your PC or Workstation configuring toprint to the WorkCentre Pro 421 or experience any difficultiesprinting, please contact your System Administrator forassistance.Print DriversNOTE: You cannot have the 421 PCL driver installed on thesame PC as the GDI driver.Xerox Network Print DriversOnce the WorkCentre Pro 421 is configured and connected tothe network, your PC or Workstation can be set up to printusing the customized Xerox Network Printer Drivers which areprovided with the machine.Xerox GDI Print DriverA GDI (Graphics Device Interface) printer driver is available forthe WorkCentre Pro 421 copier products.The GDI printer driver can be downloaded from the ’Drivers’area of www.xerox.com. and can be used when theWorkCentre Pro 421 is connected directly to your PC orWorkstation via the parallel port. Installation instructions areprovided within the GDI Printer Driver User Guide which iscontained within the printer driver software.Quick Pathway½ Create the document.½ Select [Print] and[Properties].½ Choose the Printer driverfeatures required.½ Select OK.
