Xerox WorkCentre XE90 User Manual

Also see for WorkCentre XE90: Supplementary guide

Contents

2.13U s e r G u i d eP O W E R R E D U C T I O N S2Power ReductionsThere are two modes of power reduction:Power Save, and Power Shut-off.Power SaveIn this mode, the fuser is maintained at alower heat level, thereby saving power. TheReady Indicator will flash and the otherindicators will remain on. To copy, pressStart. The copies will be made automatically.Power Shut-OffThis mode saves more power than the PowerSave Mode, but requires more time beforecopying can begin. When the copier entersthe power shut-off, the Ready Indicator willflash and the other indicators will turn off. Tocopy from the power shut-off, press the Startbutton, then select the desired features andpress Start again.Auto ClearThis XE90fx is enabled at the factory to returnto the Normal Copy mode approximately oneminute after a job is completed.• Copy Quality - Auto• Copy lighter/darker - Normal• Priority Magnification - 100%• Quantity Selected - 1Note: Time periods for the Power Shut-Off, Power Save, and Auto Clear can bemodified to meet your specific copyingneeds. Refer to the ProgrammableFeatures Settings section of this UserGuide for information about changingthese settings.XE90QRG.BK Page 13 Wednesday, January 5, 2000 9:55 AM