Xerox XC 800 Series User Manual

Xerox XC 800 Series User Manual Manual pdf 33 page image

28Customizing Your CopierProgrammable FeaturesThe default settings for various copier features may be changed to suit yourindividual copying needs. All of these features remain set until this processis repeated.Each of the programmable features, along with its program number andoptions are contained in the chart below. The procedure to change thedefault settings follows the chart.Feature ProgramNumberOption Number* Factory SettingPriority Tray: This feature allows youto set the default paper tray. At poweron or auto clear the copier will return tothe selected priority paper tray.(Models XC810, XC1040, XC1045,XC1250, and XC1255 only.)0 0 – Main Tray *1 – AlternatePaper Tray2 – Second TrayAuto Clear Time Out: This featureallows you to select the time it takes forthe copier to return to the normal copymode after a copy cycle is complete.(All models.)1 0 – Off1 – 30 seconds2 – 60 seconds *3 – 90 seconds4 – 120 secondsTime Out to Power Save: Whenenabled, this feature automaticallyreduces power used by the copier if thecopier has not been used for the setperiod of time.(All models.)2 0 – Off1 – 45 seconds2 – 90 seconds *3 – 2 minutes4 – 5 minutesTime Out to Power Shut-Off: Whenenabled, this feature significantlyreduces power used by the copier if thecopier has not been used for the setperiod of time.(All models.)3 0 – 2 minutes1 – 5 minutes *2 – 15 minutes3 – 30 minutes4 – 60 minutes5 – 120 minutes6 – Off