Xerox XC 800 Series User Manual
                                                           | |
Contents
| 
37Toner Cartridge ReplacementThe Toner Indicator on the Copier Diagram will light when the toner supplyis low. Copies can continue to be made, but you should have areplacement cartridge in stock. Copies may gradually become lighter untilthe copier stops and the indicator begins to blink. In many cases, there isnot a noticeable difference between the first copy and the last copy from atoner cartridge. The copier, however, may take longer than usual to startcopying. When this occurs the toner cartridge must be replaced. Thecopier will not operate until the toner cartridge is replaced.1. Press the release lever to open the copier.1. Press down on the green lever (1) on thefront of the old toner cartridge and pull thecartridge out (2).Note: Help the environment by recyclingyour used toner cartridge. Refer to the XeroxGreen Team brochure packed with the TonerCartridge for instructions on returning theused Toner Cartridge to Xerox.3. Shake the new toner cartridge horizontallyfour or five times and then remove thecover.4. Save the box and the cover for shipping.1. Slide the new toner cartridge in until itlocks in place.2. Close the copier by gently pushing downthe upper half.• Wait approximately two seconds for theready indicator to light.1 2 |
Related manuals for Xerox XC 800 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine