Copier careXC23/XC33/XC33D User Guide 81Cleaning the ADF/DADF beltKeeping the ADF/DADF belt clean helps prevent ADF/DADFmisfeeds. XEROX suggests that you clean the belt as needed.Note: This procedure is for copiers which are equipped with theADF/DADF.Caution: Do not pour or spray water directly on the belt.Procedure:1. Switch the copier off.2. Slightly dampen a soft lint-free cloth or paper towel withwater.3. Raise the ADF/DADF.4. Cover the document glass to prevent water from spillingon the glass.5. Wipe the exposed surface of the belt until it is clean.6. Pull the belt from the right to left to expose dirty sectionsof the belt.7. Repeat the cleaning procedure until the entire belt isclean and dry.8. Close the ADF/DADF.9. Switch the copier on.
