Xilinx ML605 Hardware User's Manual

Also see for ML605: User guide Manual Manual Hardware Tutorial

Contents

ML605 Hardware User Guide www.xilinx.com 17UG534 (v1.9) February 26, 2019Detailed DescriptionI/O Voltage RailsThere are 16 I/O banks available on the Virtex-6 device. The voltage applied to the FPGAI/O banks used by the ML605 board is summarized in Table 1-3.See the Xilinx Virtex-6 FPGA documentation for more information.2. 512 MB DDR3 Memory SODIMMThe ML605 204-pin 1.5V SODIMM socket J1 supports up to 2 GB SODIMMs. The ML605 isdelivered with a 512 MB DDR3 SODIMM for user applications.• Manufacturer: Micron• Part Number: MT4JSF6464HY-1G1B1• Description:• 512 MB (64 Mb x 64)• 1.5V 204-pin• Performance: up to DDR3-1066Table 1-3: Voltage RailsU1 FPGA Bank I/O Rail VoltageBank 0 VCC2V5_FPGA 2.5VBank 12 (1) FMC_VIO_B_M2C 2.5VBank 13 VCC2V5_FPGA 2.5VBank 14 VCC2V5_FPGA 2.5VBank 15 VCC2V5_FPGA 2.5VBank 16 VCC2V5_FPGA 2.5VBank 22 VCC2V5_FPGA 2.5VBank 23 VCC2V5_FPGA 2.5VBank 24 VCC2V5_FPGA 2.5VBank 25 VCC1V5_FPGA 1.5VBank 26 VCC1V5_FPGA 1.5VBank 32 VCC2V5_FPGA 2.5VBank 33 VCC2V5_FPGA 2.5VBank 34 VCC2V5_FPGA 2.5VBank 35 VCC1V5_FPGA 1.5VBank 36 VCC1V5_FPGA 1.5VNotes:1. The VITA 57.1 specification stipulates that the Bank 12 voltage namedFMC_VIO_B_M2C is supplied by the FMC card plugged onto the relevantFMC connector (ML605 J64). FMC_VIO_B_M2C cannot exceed the baseboard (ML605) Vadj of the FMC connector. The ML605 FMC Vadjmaximum is 2.5V.Send Feedback