Xilinx SP701 User Manual
Also see for SP701: Software Install and Board Setup
                                                  | |
Contents
|
Figure 8: FTDI USB UART CircuitSpartan-7FPGAMSP430SystemControllerUSB Conn32 KHz CrystalMC-306 32.7680K-A0:ROHSI2C0GPIOsUART_BEEPROMFT4232HUART_DJTAG_FPGA_FMCPower Supply &Power ManagementGPIOsUART_CX22791-050319The FTDI FT4232HQ data sheet is available on the Future Technology Devices International Ltd.website. The detailed FPGA connections for the feature described in this section aredocumented in the SP701 board XDC file, referenced in Appendix B: Xilinx Design Constraints.10/100/1000 Mb/s Tri-speed Ethernet PHY (RGMII)[Figure 2, callouts 8, 9]A BECKHOFF IP ET1815, ET1816 MAC can be used to implement a 10/100/1000 Mb/sEthernet interface (supports EtherCAT for Industrial Ethernet applications) in Spartan-7 FPGA,shown in the figure below, that connects to an external TI DP83867IRPAP Ethernet RGMII PHYbefore being routed to an RJ45 Ethernet connector. The associated EEPROM has 12-bytereserved for the board serial number on start location of 0x14 and 6-byte reserved for theEthernet MAC ID on start location of 0x35.Chapter 3: Board Component DescriptionsUG1319 (v1.0) July 12, 2019 www.xilinx.comSP701 Board User Guide 23Send Feedback |
Related manuals for Xilinx SP701
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine