Xilinx Zynq-7000 Getting Started Manual

Also see for Zynq-7000: Quick start guide User guide Application note Design guide User guide

Chapter 3: Getting Started with the Base Targeted Reference Design28 www.xilinx.com ZC702 and ZVIK Getting Started GuideUG926 (v6.0) December 17, 2013Base TRD Hardware Setup RequirementsThese items are required to run and test the Base TRD and the video demonstration:• The ZC702 evaluation board with the XC7Z020 CLG484-1 part• USB Type-A to USB Mini-B cable (for UART communications) and a Tera Term Pro (orsimilar) terminal program [Ref 5]• USB-UART drivers from Silicon Labs [Ref 6]• AC power adapter (12 VDC)• An HDMI cable (two cables if using the ZVIK and the user desires to use an externalvideo source for the demonstration)• SD MMC flash card containing TRD binaries formatted with FAT32Note: The included SD MMC is pre-loaded with required binaries. The binaries are loaded intothe first partition of the SD MMC card and include:- BOOT.bin- image.ub- autostart.shNote: The default binary device tree configures the video-out resolution to 1080p.Additionally, the binaries should be loaded at its root level. If the files are not loaded on theSD card, copy the files from the ready_to_test directory to the SD card.• USB Micro-B to female A adapter• A USB hub is needed for connecting a keyboard and mouse (not included with the kit).If a USB hub is not available, it is still possible to run the demonstration with only a USBmouse, but the user will not be able use the frame buffer console terminal that willcome up once the user exits the demo.• USB mouse and keyboard (optional—not included with the kit)• An HDMI-compatible display monitor that supports full HD resolution: 1920 x 1080p@ 60 Hz (not included with the kit). If the user wants to test at 720p video resolution,the display monitor should support 720p resolution: 1280 x 720p @ 60 Hz. If an HDMImonitor is not available, a DVI monitor can be used, but an HDMI to DVI-Dcable/connector adapter is required (not included with the kit). The connector adaptercan be easily obtained at most electronic retailers or through a variety of onlinesources.Instructions for running the demonstration at 720p are provided in Running the VideoDemonstration for 720p Video Resolution, page 38.Note: The example mentioned in this package has been tested with a Dell model #P2412Hdisplay monitor. However, the example should work well with any HDMI-compatible displaydevice.Send Feedback