Xytronix Research & Design WebSwitch XRDI-WS3 User Manual
                                                                                                             | |
Contents
| 
Revision 1.1 WebSwitch™ Users ManualType:arp -s {new IP address} {serial number of WebSwitch™ }Note: IP address format is xxx.xxx.xxx.xxxSerial number format is ss:ss:ss:ss:ss:ssFor example, to set WebSwitch™ (with serial number 00-0C-C8-01-00-01 ) to 10.10.10.40 thefollowing command would be used:arp -s 10.10.10.40 00:0c:c8:01:00:01Next, type:ping -s 102 {new IP address}For example, if the new IP address is 10.10.10.40, the following command would be used:ping -s 102 10.10.10.40Mac OS X:Open a terminal.Note: The terminal is in the “Utilities” directory, which is in the “Applications” directory.Type:sudo arp -s {new IP address} {serial number of WebSwitch™ }Note: Administrator password is required.IP address format is xxx.xxx.xxx.xxxSerial number format is ss:ss:ss:ss:ss:ssFor example, to set a WebSwitch™ (with serial number 00-0C-C8-01-00-01 ) to 10.10.10.40 thefollowing command would be used:sudo arp -s 10.10.10.40 00:0c:c8:01:00:01Next, type:ping -s 102 {new IP address}For example, if the new IP address is 10.10.10.40, the following command would be used:ping -s 102 10.10.10.402.3.2 Option 2: Assign a temporary IP address to configuration computerIf the first option above is not used, you can use this option to communicate with WebSwitch™. Bydefault, WebSwitch™ comes from the factory with an IP address of 192.168.1.2. Communications withWebSwitch™ may be established by assigning an IP address to the configuration computer that is onthe same network as WebSwitch™ (for example, the configuration computer could be assigned to192.168.1.50)The following example is for those running the Windows operating system:Xytronix Research & Design, Inc. 20 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine