Xytronix Research & Design WebSwitch XRDI-WS3 User Manual
                                                                                                             | |
Contents
| 
Revision 1.1 WebSwitch™ Users ManualSection 3: OperationWebSwitch™ can be operated using a web browser, by sending text commands to an XMLstatus/control page, and/or by sending Modbus/TCP requests. In addition the WebSwitch Plus™ modelallows you to control the outlets using inputs, or events. (Using an input or event to control the outletswas described throughout previous sections of the manual, and will not be described here.)3.1 Browser OperationOnce WebSwitch™ is set up, users can access the Control Page using a web browser by typing the IPaddress of WebSwitch™ into the web browser address bar. For example, using the default IP address,the user would enter http://192.168.1.2. If the IP address is changed from the default, the usermust use the new IP address. Note that if any port is used other than the default port 80, the port mustalso be included in the request. For example, accessing the unit at port 8000 would be as follows:http://192.168.1.2:8000.The following screen appears when the Control Page is Selected:Xytronix Research & Design, Inc. 63Figure 3.1a- Control Page |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine