YASKAWA CIMR-V7AM Technical Manual

YASKAWA CIMR-V7AM Technical Manual Manual pdf 29 page image

Installation 2-6Drive Diagnostics Web PageThe drive diagnostics page contains the standard header and footer along with diagnostic information specific to the current drive.Fig 2.5 – Drive Diagnostics Web Page1. Freq Ref: Frequency Reference – Monitor Parameter U-01.2. Motor Speed: Motor Speed – Monitor Parameter U-02.3. Output Power: Output Power – Monitor Parameter U-11.4. PID Feedback: PID Feedback in %. U-16.5. Input Term Sts: The Digital Input status as bit field – Monitor Parameter U-06.6. Drive Run Status: Indicates RUN/STOP state of the drive.7. Output Freq: Output Frequency – Monitor Parameter U-02.8. Output Volts: Output Voltage – Monitor Parameter U-04.9. Torque Ref: Torque Reference in % of rated torque – Monitor Parameter U-08.10. Pulse In (RP): Pulse Input (terminals RP to FC).11. Output Term Sts: Digital Output status as bit field – Monitor Parameter U-07.12. Drive Ready Status: Indicates the drive READY status.13. Output Current: Output Current – Monitor Parameter U-03.14. DC Bus Volts: DC bus Voltage – Monitor Parameter U-05.15. Elapsed Time: Elapsed Time.16. N/A:17. Analog In FR: Analog input (terminals FR to FC).18. Drive Fault Status: Indicates drive FAULT status.