No. Parameter Name Setting Range DefaultF6-07 NetRef/ComRef Function Selection 0 or 1 0Setting 0: Multi-Step Speed Operation DisabledIf the NetRef command is selected, multi-step speed input frequency references are disabled. This is the same as Yaskawa F7drives.Setting 1: Multi-Step Speed Operation EnabledMulti-step speed inputs are active and can override the frequency reference from the communications option even when theNetRef command is selected. This is the same as Yaskawa F7 drives.n F6-08: Reset Communication ParametersDetermines whether communication-related parameters (F6-oo and F7-oo) are reset when the drive is initialized usingA1-03.No. Parameter Name Setting Range DefaultF6-08 Reset Communication Parameters 0 or 1 0Setting 0: Do Not Reset Parameters F6-oo and F7-oo when the Drive Is Initialized with A1-03Setting 1: Reset F6-oo and F7-oo when the Drive Is Initialized with A1-03Note: F6-08 is not reset when the drive is initialized, but does determine whether initializing the drive with A1-03 resets communication parametersF6-oo and F7-oo.u MECHATROLINK-II ParametersParameters F6-20 through F6-26 set up the drive to operate on a MECHATROLINK-II network. Refer to the option manualfor details on parameter settings.u MECHATROLINK-III ParametersParameters F6-20, F6-21, and F6-23 through F6-26 set up the drive to operate on a MECHATROLINK-III network. Refer tothe option manual for details on parameter settings.u PROFIBUS-DP ParametersParameters F6-30 through F6-32 set up the drive to operate on a PROFIBUS-DP network. Refer to the option manual fordetails on parameter settings.u DeviceNet ParametersParameters F6-50 through F6-63 set up the drive to operate on a DeviceNet network. Refer to the option manual for detailson parameter settings.u F7-01 to F7-42: EtherNet/IP and Modbus TCP/IP Option ParametersF7-oo parameters are reserved for use with SI-EN3/V and SI-EM3/V options. Refer to the Option Installation Manuals fordetails.5.6 F: Option SettingsYASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual 1835 Parameter Details
