D.3 UL and CSA Standardsu UL Standards ComplianceThe UL/cUL mark applies to products in the United States and Canada and indicates that UL has performed product testingand evaluation and determined that their stringent standards for product safety have been met. For a product to receive ULcertification, all components inside that product must also receive UL certification.Figure D.8 UL/cUL MarkThis drive is tested in accordance with UL standard UL508C and complies with UL requirements. The following conditionsmust be met to maintain compliance when using this drive in combination with other equipment:n Installation AreaDo not install the drive to an area greater than pollution severity 2 (UL standard).n Ambient TemperatureIP20/NEMA 1, UL Type 1 enclosure: -10 °C to +40 °C (14 °F to 104 °F)IP20/IP00 Open-Chassis enclosure: -10 °C to +50 °C (14 °F to 122 °F)Finless Type: IP20/IP00 enclosure: -10 °C to +50 °C (14 °F to 122 °F)NEMA 4X, UL Type 4X/IP66 enclosure: -10 °C to +40 °C (14 °F to 104 °F)n Main Circuit Terminal WiringYaskawa recommends using closed-loop crimp terminals on all drive models. UL/cUL approval requires the use of UL Listedclosed-loop crimp terminals when wiring the drive main circuit terminals. Use only the tools recommended by the terminalmanufacturer for crimping. The wire gauges listed in Table D.6, Table D.7, and Table D.8 are Yaskawa recommendations.Refer to local codes for proper wire gauge selections.Table D.6 Wire Gauge and Torque SpecificationsDriveModel TerminalRecomm.GaugeAWG, kcmilWire RangeAWG, kcmilScrewSizeTighteningTorqueN•m (lb.in.)BA0001BA0002BA0003R/L1, S/L2, T/L3 14 18 to 14M3.5 0.8 to 1.0(7.1 to 8.9)U/T1, V/T2, W/T3 14 18 to 14⊖, ⊕1, ⊕2 – 18 to 14B1, B2 – 18 to 1414 18 to 14BA0006R/L1, S/L2, T/L3 12 14 to 10M4 1.2 to 1.5(10.6 to 13.3)U/T1, V/T2, W/T3 14 14 to 10⊖, ⊕1, ⊕2 – 14 to 10B1, B2 – 14 to 1010 14 to 10BA0010R/L1, S/L2, T/L3 10 14 to 10M4 1.2 to 1.5(10.6 to 13.3)U/T1, V/T2, W/T3 14 14 to 10⊖, ⊕1, ⊕2 – 14 to 10B1, B2 – 14 to 1010 14 to 10D.3 UL and CSA Standards474 YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual
