YASKAWA EcoTrim ET-1024 System Manual

3 Installation3.1 Required Materials3-2175932-1CD175932-1CDEcoTrim ET-1024 System3.1.2 Recommended List of Hand Tools and Equipment• Hard hat• Safety glasses• Face shield• Gloves (protective, leather)• Levels (short and long)• Ratchet handle (with 3/4-inch hex socket)• Adjustable wrench• Hammer drill with appropriate concrete bits• Phillips and flat-blade screwdrivers• Hammers (dead-blow and steel)• Hammer (non-marring)• Socket sets (SAE and Metric)• Air-impact gun (with 3/4-inch hex socket)• Open-end wrench sets (SAE and Metric)• Socket head wrench sets (Allen®, Bondhaus®, etc.)NOTESpecial anchor bolts (lag bolts) are supplied by thecustomer. Refer to section 6 for a listing of special bolts thatare required for anchoring the common equipment basesand other components of the EcoTrim ET-1024 System.36 of 64