YASKAWA PROFIBUS-DP 1000 Series Technical Manual

Also see for A1000 Series: Installation manual Technical manual Quick start guide Technical manual Manual

Contents

3 ReceivingYASKAWA ELECTRIC SIEP C730600 42B 1000-Series Option SI-P3 Technical Manual 73 ReceivingPlease perform the following tasks upon receiving the option:• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.• Verify receipt of the correct model by checking the model number printed on the option nameplate(Refer to Figure 1 on page 8).• Contact your supplier if you have received the wrong model or the option does not function properly. Contents and PackagingTable 2 Contents of Package Tools Required for Installation• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the option.• A pair of diagonal cutting pliers.• A small file or medium-grit sandpaper.Note: Tools required to prepare option cables for wiring are not listed in this manual.Description: Option Ground Wire Screws (M3) LED Label Installation Manual-Quantity: 1 1 3 1 1ERRBFRUNCOMMMANUAL