5.12 Accessing the web serverThere is a web server, which can be accessed via the IP address of the Ethernet PG/OPchannel with an Internet browser. At the web page information about the CPU and itsconnected modules can be found.Ä Chapter 5.6 ‘Hardware configuration - EthernetPG/OP channel’ on page 45It is assumed that there is a connection between PC and CPU with Internet browser viathe Ethernet PG/OP channel. This may be tested by Ping to the IP address of theEthernet PG/OP channel.The web page is built dynamically and depends on the number of modules, which areconnected to the CPU. The web page only shows information. The shown values cannotbe changed.CPUHere order number, serial number and the version of firmware and hardware of the CPUare listed. [Expert View] takes you to the advanced "Expert View".Info - Expert ViewRuntime InformationOperation Mode STOP CPU: Status informationMode Switch RUNPSystem Time 01.09.09 00:35:30:812 CPU: Date, timeOB1-Cycle Time cur = 0us, min = 0us, max = 0us, avg =0usCPU: Cyclic time:min = minimumcur = currentmax = maximumavg = averageInterface InformationX2 (RS485/COM1) MPI Operating mode RS485n MPI: MPI operationAccess to the web serverStructure of the web pageInfo - OverviewVIPA System 300S+ Deployment CPU 317-2AJ23Accessing the web serverHB140 | CPU | 317-2AJ23 | en | 17-25 59
