28 FT-8800R Operating ManualMANUAL R EPEATER S HIFT ACTIVATIONIf the ARS feature has been disabled, or if you need to set a repeater shift direction otherthan that established by the ARS, you may set the direction of the repeater shift manually.To do this:1. Press the [SET] key momentarily to enter the Set mode.2. Rotate the “Main” band DIAL knob to select Menu #33 (RPT.MOD).3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL knobto select the desired shift among “–,” “+,” and “OFF.”4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new setting andexit to normal operation.Changing the Default Repeater ShiftsIf you travel to a different region, you may need to change the default repeater shift so as toensure compatibility with local operating requirements.To do this, follow the procedure below:1. Press the [SET] key momentarily to enter the Set mode.2. Rotate the “Main” band DIAL knob to select Menu #36 (SHIFT).3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL knobto select the new repeater shift magnitude.4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new setting andexit to normal operation.If you just have one “odd” split that you need to program, don’t change the “de-fault” repeated shifts using this Menu Item! Enter the transmit and receive fre-quencies separately, as shown on page 33.REPEATER O PERATION