Yaesu CT-39A Operating Manual

37FT-8800R Operating ManualHYPER M EMORY M ODEThe FT-8800R usually stores, into memory, the operating frequency and some aspects ofoperating status (such as CTCSS/DCS data, repeater shift, power level etc.). However, the“Hyper Memory” Mode allows you to store the total current configuration of the radio intoa special “Hyper” memory bank.For example, a Hyper Memory location may store the frequencies of both the “Left” and“right” bands, plus Scanning features, etc.Hyper Memory Storage1. Set up the transceiver according to the desired configuration.2. Press and hold in the Hyper Memory key ([1] through [6]), corresponding to the HyperMemory channel into which you wish to store this configuration, for 2 seconds.Hyper Memory RecallPress the appropriate Hyper Memory key ([1] through [6]) to recall the desired Hyper Memorychannel.The current (original) configuration will lost when you recall the Hyper MemoryChannel. To prevent this from happening, press and hold in the Hyper Memorykey (generally the [1] key) to store the current configuration into that Hyper MemoryChannel before recalling the Hyper Memory Channel, or set Menu #16 to enable theAutomatic Writing feature for the Hyper Memory. See page 63 for details.MEMORY O PERATION