Yaesu CT-39A Operating Manual

32 FT-8800R Operating ManualThe FT-8800R provides a wide variety of memory system resources. These include: Independent “Regular” Memory Channels for the “Main” and “Sub” bands, each con-sisting of: 512 “Standard” memory channels, numbered “001” through “512.” Five Home channels, providing storage and quick recall of one prime frequency oneach operating band. Ten sets of band-edge memories also known as “Programmable Memory Scan” chan-nels, labeled “L1/U1” through “L10/U10.” Ten Memory Banks, labeled “BANK1” through “BANK10.” Six “Hyper-Memory” ChannelsMEMORY O PERATIONREGULAR MEMORY C HANNEL O PERATIONMemory Storage1. Select the desired frequency, while operating in the VFO mode on the “Main” band. Besure set up any desired CTCSS or DCS tones, as well as any desired repeater offset. Thepower level may be also be set at this time, if you wish to store it.2. Press and hold in the [SET] key for 1/2 second. A memory number will appear (blink-ing) on the display.3. Within ten seconds of pressing the [SET] key, use the “Main” band DIAL knob or themicrophone’s [UP]/[DWN] buttons to select the desired memory channel for storage (ifthe channel is already occupied by data stored previously, the “channel frequency” nota-tion will appear on the display.4. To attach an alpha/numeric name “Tag” to the memory, press and hold in the [SET] keyfor 1/2 second, then proceed to the next step; otherwise press the [SET] key momen-tarily to save the entry and exit to normal operation.HOME Channels(5 channels)HOME Channels(5 channels)L10/U10L10/U10L9/U9L9/U9L3/U3L3/U3L2/U2L2/U2L1/U1L1/U1512512511511004004003003002002001001Standard Memory Channels(512 channels)Standard Memory Channels(512 channels)PMS Memory Channels(10 Sets)PMS Memory Channels(10 Sets)1-HP2-HP3-HP4-HP5-HP6-HP850 MHz Band430 MHz Band250 MHz Band350 MHz Band144 MHz Band850 MHz Band430 MHz Band250 MHz Band350 MHz Band144 MHz BandRegular Memory Channels ( Band)Left Regular Memory Channels ( Band)RightHyper Memory Channels (6 channels)