Yaesu FT-2000D Operating Manual

Also see for FT-2000D: Brochure & specs Operating manual Update Update Update

Yaesu FT-2000D Operating Manual Manual pdf 114 page image

Page 112 FT-2000D O PERATING M ANUALM ENU M ODEThe Menu system of the FT-2000D provides extensive customization capability, so you can set up your transceiver just theway you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGc001 AGc001 AGc001 AGc001 AGcFST DLYFST DLYFST DLYFST DLYFST DLY” to “149 tGEn EMRGNCY149 tGEn EMRGNCY149 tGEn EMRGNCY149 tGEn EMRGNCY149 tGEn EMRGNCY.”USING THE MENU1. Press the [MENU] button momentarily, to engage theMenu mode.The Main (VFO-A) frequency display will show theMenu Number and Menu Group name, while the Sub(VFO-B) frequency display will show the Menu item;the Multi-Display window shows the current setting ofthe currently-selected Menu item.2. Rotate the Main Tuning Dial knob to select the Menuitem you wish to work on.3. Rotate the [SUB VFO-B] knob to change the currentsetting of the selected Menu item.A DVICE:Press the [CLEAR] button momentarily to reset theselected Menu item to the factory default value.4. When you have finished making your adjustments,press and hold in the [MENU] button for two secondsto save the new setting and exit to normal operation. Ifyou only momentarily press the [MENU] button, thenew settings will not be retained.Menu Mode ResetYou may reset all the Menu settings to their original factory defaults, if desired.1. Turn the front panel [POWER] switch off.2. Press and hold in the [MENU] button, and while holding it in, press the [POWER] switch to turn the transceiverback on. Now release the [MENU] button.Menu Number Menu Group Name Menu ItemMenu SettingMain Tuning Dial Knob [SUB VFO-B] Knob[MENU] Button[CLEAR] Button