Yaesu FT-2000D Operating Manual

Also see for FT-2000D: Brochure & specs Operating manual Update Update Update

Yaesu FT-2000D Operating Manual Manual pdf 9 page image

Page 7FT-2000D O PERATING M ANUALRESETTING THE MICROPROCESSORRESETTING MEMORIES (O NLY)Use this procedure to reset (clear out) the Memory chan-nels previously stored, without affecting any configura-tion changes you may have made to the Menu settings.1. Press the front panel’s [POWER] switch to turn thetransceiver off.2. Press and hold in the [AXXXXXM] button; while holding itin, press and hold in the front panel’s [POWER] switchto turn the transceiver on. Once the transceiver comeson, you may release the [AXXXXXM] button.M ENU R ESETTINGUse this procedure to restore the Menu settings to theirfactory defaults, without affecting the memories you haveprogrammed.1. Press the front panel’s [POWER] switch to turn thetransceiver off.2. Press and hold in the [MENU] button; while holding itin, press and hold in the front panel’s [POWER] switchto turn the transceiver on. Once the transceiver comeson, you may release the [MENU] button.F ULL R ESETUse this procedure to restore all Menu and Memory set-tings to their original factory defaults. All Memories willbe cleared out by this procedure.1. Press the front panel’s [POWER] switch to turn thetransceiver off.2. Press and hold in the [FAST] and [LOCK] buttons;while holding them in, press and hold in the frontpanel’s [POWER] switch to turn the transceiver on.Once the transceiver comes on, you may release theother two switches.IMPORTANT N OTE When the optional DMU-2000 is connected and isturned on the [POWER] switch, the DMU-2000’s datais also reset when perform the full reset of the FT-2000D. When the optional RF uTUNE Kit is used, performthe full reset of the FT-2000D after taking the optionalRF μTUNE Kit off.[POWER] button [AXXXXXM] button[POWER] button [MENU] buttonB EFORE YOU B EGIN[POWER] button [LOCK] button[FAST] button