Yaesu FT-4XR Operating Manual

Also see for FT-4XE: Operating manual Operating manual Advance manual Information for Customers Operating

23Programmed VFO ScanThe scan condition may be selected for VFO scanning.1. Press the [ V/M] key to enter the VFO mode.2. Press and hold the [#BAND] key.3. Press the [▲] or [▼] key to select the bandwidth for Programmed VFOscanning.Display DescriptionBAND(default setting) The scanner will sweep frequencies on the current operating band.+-1MHz The scanner will sweep ±1 MHz from the operating frequency.+-2MHz The scanner will sweep ±2 MHz from the operating frequency.+-5MHz The scanner will sweep ±5 MHz from the operating frequency.ALL The scanner will sweep all frequencies.PMS-X The scanner will sweep frequencies designated by the currentlyselected PMS (Programmable Memory Scan) frequency pair.PMS-X will appear in the [#BAND] selections after setting a PMS frequency pair. Seethe Advance Manual for detail.Weather Broadcast Channels scan (In the USA)In the USA, the VHF Weather Broadcast Station Memory Channel Bank hasbeen pre-programmed at the factory for immediate access to NOAA weatherinformation stations.1. Press and hold the [1] key to recall the Weather Broadcast Memory Bank.2. Press the [▲] or [▼] key to select the desired Weather Broadcast channel.3. To scan for additional or strongerWeather stations, just press the PTTswitch (or press and hold the [▲] or[▼] key).When the scanner pauses on astation, press the PTT switch onceto halt the scan, or press the PTTswitch again to restart the scan.CH Frequency CH Frequency1 162.550 MHz 6 162.500 MHz2 162.400 MHz 7 162.525 MHz3 162.475 MHz 8 161.650 MHz4 162.425 MHz 9 161.775 MHz5 162.450 MHz 10 163.275 MHz4. To return to normal operation, press the [ V/M] key, or press and hold the[1] key again.