Yaesu FT-817 Operating Manual

Also see for FT-817 -: Brochure & specs Operating manual Technical supplement Manual Modification Instructions

69FT-817 Operating ManualCLONINGYou can transfer all data stored in one transceiver to another set by utilizing the handy“Cloning” feature. This requires a user-constructed cloning cable which connects the ACCjacks on the two transceivers as shown below.To clone from one transceiver to another, use the following procedure:1. Insert the Clone Cable into the ACC jack of each transceiver.2. Turn both transceivers off, then press and hold in theand keys on each radio while turning the power onagain. The “CLONE MODE” notation will appear on the display.3. On the “destination” radio, press the key.4. Now, on the “source” radio, press the key. Data will nowbe transferred to the “Destination” radio from the “Source” ra-dio.5. If there is a problem during the cloning process, “Error” will bedisplayed. Check your cable connections and try again.6. If cloning is successful, turn the “destination” radio off. Nowturn the “source” radio off.Remove the clone cable. Channel and operating data for both radios are now identical. Theyboth may be turned on now for normal operation.[Distination radio][Source radio]