Yaesu FT-817 Operating Manual

Also see for FT-817 -: Brochure & specs Operating manual Technical supplement Manual Modification Instructions

7FT-817 Operating ManualINSTALLATIONCONNECTING THE M ICROPHONE To connect the microphone, plug its connector (latch side UP) into the MIC jack on theright side of the transceiver. Press itgently inward until you hear the“click” of the latch. To disconnect the microphone, pressgently on the “PUSH ” label ontop of the microphone connector’srubber boot. While pressing on thisspot, gently pull the connector out-ward from the body of the transceiver.Note: During “Digital” or “Packet” operation, it is not necessary to disconnect the micro-phone, as activation of the PTT line from the DATA connector automatically cuts off theaudio input from the MIC jack.SHOULDER S TRAP I NSTALLATIONThe convenient Shoulder Strap is designed for maximum comfort and security for your FT-817 transceiver. Refer to the illustration, and connect the shoulder strap to the attachment tabs just behindthe front panel of the FT-817. Be sure to have the shoulder strap aligned correctly,without twists in the straps. A convenient microphone hanger is located on one end of the padded top section of theShoulder Strap. When not in use, the microphone may be affixed here, freeing both ofyour hands for other tasks.