Yaesu FTDX9000 - UPDATE V0518 AND V11.53 Update Manual

Also see for FTDX-9000D: Operation manual Brochure & specs Update guide Update guide Update guide

11/30/09PEP9000This procedure is used to update Main CPU Ver. 0518 and EDSP Ver. 11.53 flashprogramming for FTdx9000 Transceivers that have already been updated toPEP9000.*If you already have software Ver. 11.53 it is not necessary to update the FTdx9000 EDSP again.IMPORTANT: This procedure is only needed under the below conditions:• Must have the PEP9000 logo sticker on the radio below the serial number label.PEP9000 Logo Sticker• Must have MAIN CUP Version 0505 or higher or EDSP Version 11.24. While holding the threebuttons [GEN]＋[50]＋[ENT] turn the radio on and read the 7 digits on the top line of the LEDdisplay. See page (6) for more detail instructions. If the software version is not immediatelydisplayed, your radio has not been updated to PEP9000; you must have the radio updated. Pleasecontact Vertex Standard, Amateur Tech Support.If your radio meets the above conditions you may proceed to update the Main CPU to V0518programming and EDSP to V11.53.We recommend installing the Flash Programming Software on a PC computer with Windows 2000,XP or Vista Operating System; and use the CT-119 programming cable or 8-pin mini-DIN PGM-SW(P0091526) and serial cable RS-232C, DB9F to DB9F straight cable.NOTE: There are many USB adapters available; however some may not function with this software.We recommend using the latest USB adapter driver software when available...The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) ofthe FTdx9000Contest, FTdx9000D and FTdx9000MPThe update software is available from our website at http://www.yaesu.com. The CT-119programming cable is available from your authorized Vertex Standard dealer. You may also orderby email to Vertex Standard parts department,