15FTM-10R/E Technical SupplementUHF S-Meter Calibration1. Set the RF signal generator to 440.050 MHz. Set thegenerator for ±3.5 kHz deviation of a 1 kHz modula-tion tone, and set the RF output level from the signalgenerator to -5 dBμ.2. Press the key repeatedly to display the fre-quency.3. Set the transceiver frequency to 440.050 MHz.4. Press and hold the key for one second toenter the Menu mode.5. Rotate the DIAL knob to select Menu Item "F29 RX MF29 RX MF29 RX MF29 RX MF29 RX MMODEMODEMODEMODEMODE".6. Press the key, then rotate the DIAL knob to select"FM".7. Press the key to save the new setting andexit the Menu mode.8. Press the key repeatedly to display theAlignment Menu.9. Press the key repeatedly to select Alignment MenuItem "A-7 SM UA-7 SM UA-7 SM UA-7 SM UA-7 SM U/DDDDD".10.Press the key to save the new setting.11.Increase the output level of the signal generator up to+23dBμ.12.Press the key to save the new setting.13.Press the key repeatedly to display the fre-quency.14.Press and hold the key for one second toenter the Menu mode.15.Rotate the DIAL knob to select Menu Item "F29 RX MF29 RX MF29 RX MF29 RX MF29 RX MMODEMODEMODEMODEMODE".16.Press the key, then rotate the DIAL knob to select"WIDE FM".17.Press the key to save the new setting andexit the Menu mode.18.Press the key repeatedly to display theAlignment Menu.19.Press the key repeatedly to select Alignment MenuItem "A-7 SM UA-7 SM UA-7 SM UA-7 SM UA-7 SM U/DDDDD".20.Press the key to save the new setting.21.Increase the output level of the signal generator up to0 dBμ.22.Press the key to save the new setting.Squelch Adjustment1. Set the RF signal generator to 146.050 MHz. Set thegenerator for ±3.5 kHz deviation of a 1 kHz modula-tion tone, and set the RF output level from the signalgenerator to -12 dBμV.2. Press the key repeatedly to display the fre-quency.3. Set the transceiver frequency to 146.050 MHz.4. Press and hold the key for one second toenter the Menu mode.5. Rotate the DIAL knob to select Menu Item "F29 RX MF29 RX MF29 RX MF29 RX MF29 RX MMODEMODEMODEMODEMODE".6. Press the key, then rotate the DIAL knob to select"FM".7. Press the key to save the new setting andexit the Menu mode.8. Press the key repeatedly to display theAlignment Menu.9. Press the key repeatedly to select Alignment MenuItem "A-8 SQL UA-8 SQL UA-8 SQL UA-8 SQL UA-8 SQL U/DDDDD".10.Press the key to save the new setting.11.Increase the output level of the signal generator up to-4 dBμV.12.Press the key to save the new setting.13.Press the key repeatedly to display the fre-quency.14.Press and hold the key for one second toenter the Menu mode.15.Rotate the DIAL knob to select Menu Item "F29 RX MF29 RX MF29 RX MF29 RX MF29 RX MMODEMODEMODEMODEMODE".16.Press the key, then rotate the DIAL knob to select"WIDE FM".17.Press the key to save the new setting andexit the Menu mode.18.Press the key repeatedly to display theAlignment Menu.19.Press the key repeatedly to select Alignment MenuItem "A-8 SQL LEVLA-8 SQL LEVLA-8 SQL LEVLA-8 SQL LEVLA-8 SQL LEVL".20.Increase the output level of the signal generator up to-1 dBμV.21.Press the key to save the new setting.22.Increase the output level of the signal generator up to+7 dBμV.23.Press the key to save the new setting.24.Press the key to save the new setting andexit the Alignment Menu mode.Alignment