Yaesu FTM-3100R Advanced Manual

Also see for FTM-3100R: Advance manual Operating manual Operating manual Quick manual

19ScanningFTM-3100R Advance ManualProgrammable Memory Scan (PMS)The FTM-3100R can be set to tune or scan only the frequencies between user-definedlower and band limits.Example: Set up a PMS channel by registering a lower frequency of 144.300 MHz, andan upper frequency of 148.000 MHz to the L1/U1 memory channels.Registering to the programmable memory channels1. In the VFO mode, select the desired lower-limit scan frequency (144.300 MHz).2. Press and hold the [V/M(MW)] key for onesecond.A memory number will appear in the bottomright corner of the display.3. Within five seconds of pressing the[V/M(MW)] key, rotate the DIAL knob to se-lect “L1”.VOLDIALD W M WSETUPREV V / MM H zSQL TXPONote: While operating in the Memory Storage mode, the keypad of the MH-48A6JAMicrophone may be used to enter the memory channel number directly.To do this, enter the desired Channel Number (see table below) on the keypadand then press the [#] key.To enter Memory Channel “L1”, press [2] à [0] à [1] à [#]To enter Memory Channel “U0”, press [2] à [2] à [0] à [#]L1 201 L3 205 L5 209 L7 213 L9 217U1 202 U3 206 U5 210 U7 214 U9 218L2 203 L4 207 L6 211 L8 215 L0 219U2 204 U4 208 U6 212 U8 216 U0 2204. Press the [V/M(MW)] key again, momentarily, to store the displayed data into thememory channel (L1).5. Select the desired upper-limit scanning frequency (148.000 MHz).6. Within five seconds of pressing the[V/M(MW)] key, rotate the DIAL knob to se-lect “U1”.7. Press the [V/M(MW)] key again, momentar-ily, to store the displayed data into the mem-ory channel (U1).