Yaesu FTM-3100R Advanced Manual

Also see for FTM-3100R: Advance manual Operating manual Operating manual Quick manual

5Advanced OperationFTM-3100R Advance ManualSplit Tone OperationThe FTM-3100R can be configured to operate in a “Split Tone” system via the Setupmenu, to facilitate operation on repeaters using a mix of both CTCSS and DCS control.1. Press and hold in the [MHz(SETUP)] key forone second to enter the Set mode.2. Rotate the DIAL knob to select “SQL EXP33”.3. Press the [MHz(SETUP)] key, then rotatethe DIAL knob to select “ON”.Default: OFFVOLDIALD W M WSETUPREVSQL TXPO V / MM H z4. Press the [MHz(SETUP)] key momentarily,then rotate the DIAL knob to select “SQLTYPE 34”.5. Press the [MHz(SETUP)] key, and then ro-tate the DIAL knob to select the followingparameters.D CODE: DCS Encode only (the “DCS” iconwill blink during operation)T DCS: Encodes a CTCSS Tone andDecodes a DCS code (the “T”icon will blink and the “DCS” iconwill appear during operation)D TONE: Encodes a DCS code andDecodes a CTCSS Tone (the “TSQ” icon will appear and “DCS”icons will blink during operation)