Yaesu FTM-7250DR Operating Manual

Also see for FTM-7250DE: Information for Customers Operating Manual Technical supplement Advance manual

Contents

Yaesu FTM-7250DR Operating Manual Manual pdf 29 page image

27Memory Operation8. Press and hold the [V/M(MW)] key, to store the displayed data into the selectedmemory channel slot.Split MemoryA separate transmit frequency may be registered to a memory channel to which a receivefrequency has already been registered.Note: For details, refer to the Advanced Manual (download from the Yaesu website).Memory RecallOnce the desired frequencies are stored into memory channels, switch from the “VFO”mode to the “Memory Recall” mode, to operate on the just-stored memory channels.1. Press the [V/M(MW)] key, repeated-ly if necessary, until the “MR” iconand a memory channel number ap-pear on the display; this indicatesthat the “Memory Recall” mode isnow engaged.2. When more than one memory hasbeen stored, use the DIAL knobto select any of the programmedmemories for operation.Note:• Alternatively, the microphone [UP] or [DWN] key may be used to step or scan throughthe available memories. When using the microphone keys, press the key momen-tarily to move one step up or down; press and hold the [UP] or [DWN] key to beginmemory scanning.• While operating in the Memory Recall mode, press the [MHz(SETUP)] key to togglethe display between indication of the frequency, and indication of the Alpha/Numericlabel.Memory Recall from the Microphone KeypadWhile operating in the Memory Recall mode, the keypad of the MH-48A6JA Microphonemay be used for direct recall of memory channels.To do this, enter the desired Channel Number on the keypad.For example: To recall Memory Channel “7”, press [0] à [0] à [7] or [7] à [#]To recall Memory Channel “123”, press [1] à [2] à [3]You may also recall Programmable Memory Scan (PMS) channels (“L0/U0” through “L9/U9”) by entering the channel numbers listed in the below table:L1 201 L3 205 L5 209 L7 213 L9 217U1 202 U3 206 U5 210 U7 214 U9 218L2 203 L4 207 L6 211 L8 215 L0 219U2 204 U4 208 U6 212 U8 216 U0 220