Yaesu VX-8GE Operating Manual

VX-8GE OPERATING MANUAL146SET MODE ITEM 95: VFO MODEFunction: Selects or disables the VFO band edge limiting for the current band.Available Values: ALL / BANDDefault: BANDALL: When the VFO frequency reaches the high edge of the current band, the VFOfrequency will jump to the low band edge of the next band (or vice versa).BAND: When the VFO frequency reaches the high band edge of the current band, theVFO frequency will jump to the low band edge of the current band (or vice versa).SET MODE ITEM 96: VFO SKIPFunction: Set the My Band.Available Values: ON / OFFDefault: OFFThe “My Band” feature allows you to select several operating bands, and make only thosebands available for selection via the B key.ON: Only the bands that are turned on will be shown when pushing the B key.OFF: When the B key is pressed, the bands that are turned “OFF” will not be shown.See page 119 for details.SET MODE ITEM 97: VIBRATORFunction: Enables/Disables the Vibrator function.Available Values: OFF / BUSY / SIGNALINGDefault: OFFOFF: The Vibrator function is disabled.BUSY: The transceiver vibrates when receiving any signal.SIGNALING: The transceiver vibrates when a signal which includes a CTCSS, DCS, orEPCS code which matches the decoder, is received.SET MODE ITEM 98: VIBRATOR MODEFunction: Selects the vibration mode of the Vibrator function.Available Values: MODE1 / MODE2 / MODE3Default: MODE1MODE1: The transceiver vibrates continuously.MODE2: The transceiver vibrates for a long interval.MODE3: The transceiver vibrates for a short interval.SET MODESET MODE SELECTION DETAILS