INSTRUMENT AND CONTROL FUNCTIONS4-104EAU13121Fuel tank capTo remove the fuel tank capSlide the lock cover open, insert the keyinto the lock, and then turn it 1/4 turnclockwise. The lock will be releasedand the fuel tank cap can be removed.To install the fuel tank cap1. Insert the fuel tank cap into thetank opening with the key insertedin the lock and with the “ ” markfacing forward.2. Turn the key counterclockwise tothe original position, remove it, andthen close the lock cover.TIPThe fuel tank cap cannot be installedunless the key is in the lock. In addition,the key cannot be removed if the cap isnot properly installed and locked.WARNINGEWA10131Make sure that the fuel tank cap isproperly installed before riding.Leaking fuel is a fire hazard.EAU13212FuelMake sure there is sufficient gasoline inthe tank.WARNINGEWA10881Gasoline and gasoline vapors areextremely flammable. To avoid firesand explosions and to reduce therisk of injury when refueling, followthese instructions.1. Before refueling, turn off the en-gine and be sure that no one is sit-ting on the vehicle. Never refuelwhile smoking, or while in the vi-cinity of sparks, open flames, orother sources of ignition such asthe pilot lights of water heaters andclothes dryers.2. Do not overfill the fuel tank. Stopfilling when the fuel reaches thebottom of the filler tube. Becausefuel expands when it heats up,heat from the engine or the suncan cause fuel to spill out of thefuel tank.1. Fuel tank cap lock cover2. “ ” mark3. Unlock.4. Lock.