Yamaha 25D Owner's Manual
Also see for 25D: Owner's manual
                                                                    | |
Contents
|
Maintenance46plosion hazard. Dispose of old gasoline according to lo-cal regulations.1. Empty the fuel tank into an approvedcontainer.2. Pour a small amount of suitable solventinto the tank. Install the cap and shakethe tank. Drain the solvent completely.3. Remove the screws holding the fuel jointassembly. Pull the assembly out of thetank.4. Clean the filter (located on the end of thesuction pipe) in a suitable cleaning sol-vent. Allow the filter to dry.5. Replace the gasket with a new one. Re-install the fuel joint assembly and tightenthe screws firmly.EMU29312Inspecting and replacing anode(s)Yamaha outboard motors are protected fromcorrosion by sacrificial anodes. Inspect theexternal anodes periodically. Remove scalesfrom the surfaces of the anodes. Consult aYamaha dealer for replacement of externalanodes.CAUTION:ECM00720Do not paint anodes, as this would renderthem ineffective.NOTE:Inspect ground leads attached to externalanodes on equipped models. Consult aYamaha dealer for inspection and replace-ment of internal anodes attached to the pow-er unit.EMU29390Checking top cowlingCheck the fitting of the top cowling by push-ing it with both hands. If it is loose have it re-paired by your Yamaha dealer.EMU29400Coating the boat bottomA clean hull improves boat performance. Theboat bottom should be kept as clean of ma-rine growth as possible. If necessary, theboat bottom can be coated with an anti-foul-ing paint approved for your area to inhibitmarine growth.Do not use anti-fouling paint which includesZMU02066ZMU02924ZMU04677 |
Related manuals for Yamaha 25D
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine