Operation59EMU32641Procedure for tilting up (manual tiltmodels)1. Place the gear shift lever in neutral.2. Place the tilt lock lever in the release po-sition.3. Hold the rear of the top cowling with onehand, tilt the engine up, and turn the tiltsupport lever to the lock position andsupport the engine. NOTICE: Do notuse the tilt support lever or knobwhen trailering the boat. The out-board motor could shake loose fromthe tilt support and fall. If the motorcannot be trailered in the normal run-ning position, use an additional sup-port device to secure it in the tiltposition. For more detailed informa-tion, see page 64. [ECM01641]EMU32723Procedure for tilting up (power trimand tilt models)1. Place the remote control lever / gearshift lever in neutral.2. Press the power trim and tilt switch “ ”(up) until the outboard motor has tiltedup completely.ZMU03405ZMU03358
