Reference34Function Category Settings Default value Setting range Full range Subwoofer PagenumberStandard Dante Standard DanteMETER Input Meter Shows analog input signal levels. (OnDante models this will appear asANA.)— -∞ to 0dBFS (×2) (×2) (×2) (×2) 11Input Meter (DNT) Shows digital input signal (Dante) lev-els. — -∞ to 0dBFS (×2) (×2) 11UNIT ID Shows the ID assigned so that DZR-Dor DXS-XLF-D series devices on theDante network can be recognized.01 01 to FE 11, 24,25LABEL Shows the label. — 12 characters 11, 24MASTER Level Sets the output level. (Unit: dB) 0.0dB -∞, -80 to +10.0dB 11SP Output Meter Shows the output level. — -∞ to 0dBFS 11Protection(THERMAL, MUTED)Appears when safeguard functionshave been activated. Hidden THERMAL, MUTED 11MUTED from REMOTE Mutes audio from an external device. Off — 28Function Category Parameter Default value Setting range Full range Subwoofer PagenumberStandard Dante Standard DanteTUNING HPF OFF, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,110Hz, 120Hz OFF 60Hz to 120Hz 11, 15LPF 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,110Hz, 120Hz 120Hz 60Hz to 120Hz 11, 15POLARITY NORMAL NORMAL, INVERTED D-CONTOUR OFF (NORMAL), FOH/MAIN, MONI-TOR OFF (NORMAL) OFF (NORMAL), FOH/MAIN,MONITOR 11, 15D-XSUB OFF (NORMAL), BOOST, XTEND LF OFF (NORMAL) OFF (NORMAL), BOOST, XTEND LF 11, 16EQ (6 bands) ON, OFF ON ON, OFF 11, 16BYPS ON ON, OFF (×6) (×6) (×6) (×6)FREQ 20.0Hz to 20.0kHz (×6) (×6) (×6) (×6)GAIN 0.0 -10.0 to +10.0dB (×6) (×6) (×6) (×6)Q 2.00 0.7 to 10.0 (×6) (×6) (×6) (×6)TYPE PEQPEQ, LO SHELF 6dB,LO SHELF 12dB, HI SHELF 6dB,HI SHELF 12dB, HPF, LPF (×6) (×6) (×6) (×6)DELAY ON, OFF ON ON, OFF 11, 16ms 0.0ms 0.0 to 140.0ms m 0.00m 0.00 to 48.10m ft 0.0ft 0.0 to 157.8ft CARDIOID OMNI (FRONT), CARDIO-2 (REAR),CARDIO-3 (REAR) OMNI (FRONT) OMNI (FRONT), CARDIO-2 (REAR),CARDIO-3 (REAR) 11, 17Function Tree