Yamaha F200B Owner's Manual

Also see for F200B: Rigging guide Owner's manual Service manual

Contents

2-6EEMU01112Power Trim/Tilt SwitchesThe power trim/tilt adjusts the motor angle inrelation to the transom. The power trim/tiltswitch is located on the remote control levergrip. Individual-engine switches are also onthe control cover. Pushing the switch “UP”trims the motor up, then tilts the motor up.Pressing the switch “DN” tilts the motordown and trims the motor down. When theswitch button is released, the motor will stopin its current position.NOTE:@ On the dual engine control, the switch onthe remote control grip controls bothengines at the same time. Refer to the sections “Adjusting TrimAngle” and “Tilting Up/Down” in Chapter 3for instructions on usage.@EMU00106Free AcceleratorTo open the throttle without shifting intoeither Forward or Reverse, push the freeaccelerator button and turn the remote con-trol lever.NOTE:@ The free accelerator button can be oper-ated only when the remote control lever isin the Neutral position. After the button is pushed, the remotecontrol lever must be moved at least 35°to begin opening the throttle. After operating the free accelerator, returnthe remote control lever to the Neutralposition. The free accelerator button willreturn automatically to its set position.The remote control will then engage For-ward and Reverse normally.@ @1 Fully-open2 Fully-closed3 Free accelerator