Components25EMU26341Tilt support lever for power trim andtilt modelTo keep the outboard motor in the tilted upposition, lock the tilt support lever to theclamp bracket.NOTICEECM00660Do not use the tilt support lever or knobwhen trailering the boat. The outboardmotor could shake loose from the tilt sup-port and fall. If the motor cannot be trail-ered in the normal running position, usean additional support device to secure itin the tilt position.EMU26373Cowling lock lever(s) (turn type)To remove the engine top cowling, turn thecowling lock lever(s) and lift off the cowling.When installing the cowling, check to be sureit fits properly in the rubber seal. Then lockthe cowling again by returning the cowlinglock lever(s) to the lock position.EMU26461Flushing deviceThis device is used to clean the cooling wa-ter passages of the motor using a gardenhose and tap water.TIP:For details on usage, see page 64.1. Trim tab2. BoltBolt tightening torque:F50F, F60C 18.0 Nm (1.8 kgf-m,13 ft-lb)FT60D 36.0 Nm (3.6 kgf-m, 26 ft-lb)ABZMU0309712ZMU035951. Cowling lock lever(s)1. Flushing device1ZMU050931ZMU05095
