Operation56switch while the boat is moving.Adjust the outboard motor trim angle usingthe power trim and tilt switch.To raise the bow (trim-out), press the switch“ ” (up).To lower the bow (trim-in), press the switch“ ” (down).Make test runs with the trim set to differentangles to find the position that works best foryour boat and operating conditions.EMU27912Adjusting boat trimWhen the boat is on plane, a bow-up attituderesults in less drag, greater stability and effi-ciency. This is generally when the keel line ofthe boat is up about 3 to 5 degrees. With thebow up, the boat may have a greater tenden-cy to steer to one side or the other. Compen-sate for this as you steer. When the bow ofthe boat is down, it is easier to acceleratefrom a standing start onto plane.1. Power trim and tilt switch1. Power trim and tilt switch1. Power trim and tilt switchUPDN1ZMU04193UPDNZMU0363411. Power trim and tilt switch
