Trouble Recovery712. Remove the start-in-gear protection ca-ble from the starter, if equipped.3. Remove the starter/flywheel cover afterremoving the bolt(s).4. Prepare the engine for starting. For fur-ther information, see page 29. Be surethe engine is in neutral and that the en-gine stop switch lanyard lock plate is at-tached to the engine stop switch. Themain switch must be “ ” (on), ifequipped.5. If equipped the choke knob, pull out itwhen the engine is cold. After the enginestarts, gradually return the choke knob toits home position as the engine warmsup.6. Insert the knotted end of the emergencystarter rope into the notch in the flywheelrotor and wind the rope several turnsaround the flywheel clockwise.7. Give a strong pull straight out to crankand start the engine. Repeat if neces-sary.1. Start-in-gear protection cableOFFONZMU01880
