INSTRUMENT AND CONTROL FUNCTIONS3-103EAU03945SeatsRider seatTo remove the rider seat1. Insert the key into the seat lock,and then turn it as shown.2. Pull the rider seat off.To install the rider seat1. Insert the projection on the front ofthe rider seat into the seat holderas shown, and then push the rearof the seat down to lock it in place.2. Remove the key.Passenger seatTo remove the passenger seat1. Remove the rider seat.2. Pull the passenger seat up.To install the passenger seat1. Slide the receptacle on the rear ofthe passenger seat over the seatholder as shown, and then pushthe front of the seat down.2. Install the rider seat.NOTE:_Make sure that the seats are properlysecured before riding._1. Rider seat lock2. Unlock.1. Projection2. Seat holder1. Receptacle2. Seat holderE_5jw.book Page 10 Friday, March 30, 2001 2:14 PM