INSTRUMENT AND CONTROL FUNCTIONS3-123NOTE:_Align the appropriate groove on the ad-justing mechanism with the top of thefront fork cap bolt._CI-01ERebound damping forceTo increase the rebound dampingforce and thereby harden the rebounddamping, turn the adjusting knob oneach fork leg in direction a. To de-crease the rebound damping force andthereby soften the rebound damping,turn the adjusting knob on each fork legin direction b.CI-09ECompression damping forceTo increase the compression dampingforce and thereby harden the compres-sion damping, turn the adjusting screwon each fork leg in direction a. To de-crease the compression damping forceand thereby soften the compressiondamping, turn the adjusting screw oneach fork leg in direction b.CI-02E1. Current setting2. Front fork cap boltHard Stan-dard SoftSetting 1 2 3 4 5 6Minimum (soft) 17 clicks in direction b*Standard 12 clicks in direction b*Maximum (hard) 1 click in direction b** With the adjusting knob fully turned in direction a1. Compression damping force adjusting screwMinimum (soft) 21 clicks in direction b*Standard 12 clicks in direction b*Maximum (hard) 1 click in direction b** With the adjusting screw fully turned in direction aE_5jw.book Page 12 Friday, March 30, 2001 2:14 PM