INSTRUMENT AND CONTROL FUNCTIONS3-183CD-01EWith the engine turned off:1. Move the sidestand down.2. Make sure that the engine stop switch is set to “ ”.3. Turn the key to “ON”.4. Shift the transmission into the neutral position.5. Push the start switch.Does the engine start? The neutral switch may be defective.The motorcycle should not be ridden untilchecked by a Yamaha dealer.With the engine still running:6. Move the sidestand up.7. Keep the clutch lever pulled.8. Shift the transmission into gear.9. Move the sidestand down.Does the engine stall?After the engine has stalled:10. Move the sidestand up.11. Keep the clutch lever pulled.12. Push the start switch.Does the engine start?The sidestand switch may be defective.The motorcycle should not be ridden untilchecked by a Yamaha dealer.The clutch switch may be defective.The motorcycle should not be ridden untilchecked by a Yamaha dealer.NONOTE:This check is most reliable if performed witha warmed-up engine.YESYES NOThe system is OK. The motorcycle can be ridden.YES NOE_5jw.book Page 18 Friday, March 30, 2001 2:14 PM