Yamaha MT 10 Owner's Manual

Also see for MT 10: Owner's manual Owner's manual Owner's manual

Contents

Instrument and control functions5-10123456789101112The tachometer allows the rider tomonitor the engine speed and keep itwithin the ideal power range.When the key is turned to “ON”, the ta-chometer will sweep across the r/minrange and then return to zero r/min inorder to test the electrical circuit.NOTICEECA10032Do not operate the engine in the ta-chometer red zone.Red zone: 11800 r/min and aboveClockThe clock uses a 12-hour time system.To set the clock1. Turn the key to “ON”.2. Push the “CLOCK” button for twoseconds.3. When the hour digits start flashing,push the “RESET” button to set thehours.4. Push the “CLOCK” button, and theminute digits will start flashing.5. Push the “RESET” button to setthe minutes.6. Push the “CLOCK” button andthen release it to start the clock.Fuel meterThe fuel meter indicates the amount offuel in the fuel tank. The display seg-ments of the fuel meter disappear to-wards “E” (empty) as the fuel leveldecreases. When the last segmentstarts flashing, refuel as soon as possi-ble.TIPIf a problem is detected in the electricalcircuit, the fuel level segments and “ ”will flash repeatedly. If this occurs, havea Yamaha dealer check vehicle.Coolant temperature/air tempera-ture displayPush the select switch “SELECT” fortwo seconds to switch the display be-tween the coolant temperature mode1. Clock11. Fuel meter11. Select switch “SELECT”RESSETPASSTCSSELECT1